SBYV26C-M3 www.vishay.com vishay general semiconductor revision: 15-nov-16 1 document number: 89440 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 glass passivated ultrafast rectifier features ? superectifier structure for high reliability condition ? cavity-free glass- passivated junction ? ideal for printed circuit boards ? ultrafast reverse recovery time ? low forward voltage drop ? low leakage current ? low switching losses, high efficiency ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 275 c max. 10 s, per jesd 22-b106 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. mechanical data case: do-204al, molded plastic over glass body ? molding compound meets ul 94 v-0 flammability rating base p/n-m3 - halogen-free, rohs-compliant, and commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end note (1) peak reverse energy meas ured with 8/20 s surge primary characteristics i f(av) 1.0 a v rrm 600 v i fsm 30 a t rr 30 ns v f 1.3 v t j max. 175 c package do-204al (do-41) diode variatio ns single die do-204al (do-41) superectifier ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol value unit maximum repetitive pe ak reverse voltage v rrm 600 v maximum rms voltage v rms 420 v maximum dc blocking voltage v dc 600 v maximum average forw ard rectified current 0.375" (9.5 mm) lead length at t l = 85 c (fig. 1) i f(av) 1.0 a peak forward surge current 10 ms single ha lf sine-wave superimposed on rated load i fsm 30 a non repetitive peak reverse energy e rsm (1) 5.0 mj operating junction and storage temperature range t j , t stg -65 to +175 c
SBYV26C-M3 www.vishay.com vishay general semiconductor revision: 15-nov-16 2 document number: 89440 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) thermal resistance from junction to ambient at 0.375" (9 .5 mm) lead length, mounted on pcb wi th 0.5" x 0.5" (12 mm x 12 mm) cop per pads (2) thermal resistance from junction to lead at 0.375" (9.5 mm) lead length with both leads attached to heatsink ? ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - forward power loss characteristics electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol value unit minimum avalanche ? breakdown voltage 100 a v br 600 v maximum instantaneous forward voltage 1.0 a t j = 25 c v f 2.5 v t j = 175 c 1.3 maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 5.0 a t a = 165 c 150 max. reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 30 ns maximum junction cap acitance 4.0 v, 1 mhz c j 45 pf maximum reverse recovery current slope i f = 1 a, v r = 30 v, di f /dt = - 1 a/s di r /dt 7.0 a/s thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol value unit typical thermal resistance r ? ja (1) 70 c/w r ? jl (2) 16 ordering information (example) preferred p/n unit weight (g ) preferred package code base quantity delivery mode SBYV26C-M3/54 0.339 54 5500 13" di ameter paper tape and reel SBYV26C-M3/73 0.339 73 3000 ammo pack packaging 0 0.6 0.8 1.0 1.2 0 25 50 75 100 125 150 175 average forward rectified current (a) temperature (c) 0.4 0.2 mounted on p.c.b. lead mounted on heat s ink t a = ambient temperature t l = lead temperature 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 0.2 0.4 0.6 0.8 1.0 1.2 average forward current (a) average power lo ss (w) d = t p /t t p t d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0.8 d = 1.0
SBYV26C-M3 www.vishay.com vishay general semiconductor revision: 15-nov-16 3 document number: 89440 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - maximum non-repetitive peak forward surge current fig. 4 - typical instantaneous forward characteristics fig. 5 - typical reverse leakage characteristics fig. 6 - typical j unction capacitance fig. 7 - typical transient thermal impedance ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1 10 100 1 100 10 peak forward s urge current (a) number of cycle s at 50 hz t j = t j max. 10 m s s ingle half s ine-wave 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 in s tantaneou s forward voltage (v) 0.01 0.1 10 100 1 in s tantaneou s forward current (a) t j = 125 c t j = 25 c t j = 165 c pul s e width = 300 s 1 % duty cycle 020 60 40 100 80 0.01 0.001 0.1 10 1 100 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e leakage current (a) t j = 125 c t j = 25 c t j = 165 c rever s e voltage (v) junction capacitance (pf) 0.1 1 10 100 100 10 1 t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p tran s ient thermal impedance (c/w) 0.01 0.1 1 10 100 100 10 1 t - pul s e duration ( s )
SBYV26C-M3 www.vishay.com vishay general semiconductor revision: 15-nov-16 4 document number: 89440 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) do-204al (do-41) 0.107 (2.7) 0.080 (2.0) dia. 0.034 (0.86) 0.028 (0.71) dia. 1.0 (25.4) min. 1.0 (25.4) min. 0.205 (5.2) 0.160 (4.1)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
